Dupoxy

Suitable for resistant installation and grouting of floor and wall tiles and mosaic in interiors and exteriors with grout joints between 2 to 15 mm wide, such as:

• Floor and wall tiles in general
• Floor and wall tiles in bathrooms and showers
• Under floor heating
• Kitchen counter tops
• Terraces and balconies
• Dairy & food processing plant
• Dubond's dupoxy can be used for the grouting of ceramic tiles in environments submitted to direct contact with foods, like workbench of meats, dairy products of floor, basin for fish breeding, workbench in restaurant and bakeries
• Suitable for applications where surfaces are exposed to aggressive chemical substances such as dairies, laboratories, pubs, food factories in general
• Also recommended for grouting swimming pools and tanks containing thermal or brackish water

• DUPOXY must be applied evenly on the tile covering with a hard rubber spreader
• Seal the joints by completely grouting them, applying the filler diagonally to the tiles
• Remove most of the excess grout immediately using the spreader, leaving only a thin film on the tile
• Right after this start to clean up the tile surface
• On completion, to clean the tiles use a thick, hard and large-sized sponge damped in clean water to avoid removing grout from the joints. Use circular movements to soften the film of grout on the tiles and finish cleaning the joint surface. Specific high-dispersion polymers ensure all grout residues are removed using only a small amount of water; which would otherwise impair the final chemical resistances
• Rinse frequently to ensure clean water is used at all times, using appropriate trays and grills with cleaning rollers, if necessary, replace the sponge or felt cleaning pad when saturated with grout.
• Finish cleaning up by dragging the sponge diagonally across the tiles to avoid going into the joints. Any remaining grout marks can be removed before they harden with a I 0/20 % water-alcohol solution

• Appearance - Part A : Thick colored gel, Part B: soft gel
• Mixing ratio - Part A : 2 parts by weight, Part B : I parts by weight (The two parts are pre-batched in their respective containers.)
• Mix consistency - Creamy
• Specific gravity of mix - 1.55 kg/l
• Pot life - About 45 minutes at + 23°c
• Permitted application temperatures - From + 12°C to + 30°C
• Recommended application temperature - From+ 18°C to +23°C
• Walk on time - 24 hours at 23° C
• Ready for use - 5 days at 23°C
• Joint width - From 2mm to 15 mm

1 Kg container & 5 Kg container

24 months in the original packaging in dry place