Sealers and CleanerSTONE SEAL
|
||||||||||||||||||||||||||||||
| DIRECTIONS : |
| Apply on the dry and clean surface a thin even layer of STONE SEAL by means of a brush, lambs wool or low pressure sprayer. Two coats wet on wet are required only on the most absorbing materials. Allow to dry completely. For polished materials, remove the dull patina with steel wool pad (type 00) or with a cloth slightly damp with STONE SEAL. For large surfaces, use a floor machine with red pad or fine steel wool pad (type 00). The surface can be opened to foot traffic 3-6 hours after treatment; however it must not be wet for the next 24 hours, i.e. until the product has completely hardened. |
| COVERAGE : |
| 15 ÷ 25 sq. m. ⁄lt. |
| STORAGE : |
| Keep the tin closed and in a cool place. |
| SHELF LIFE : |
| 12–24 months in original sealed packing kept in cool and dry place. |
| MAINTENANCE : |
| For regular maintenance, clean the surface with NEUTRAL CLEANER. On polished Materials, one coat of MAINTENANCE WAX can be applied every 2–6 months or as needed. |
| IMPORTANT NOTICE : |
| Apply only on perfectly dry surfaces avoid any excess of product. |
| FORTUITOUSLEAKAGE AND WASTE DISPOSAL METHOD: |
| In case material is released or spilled,clean up the product,which can be reused.Absorb all residues with sand, sawdust etc.Store the residue in metal tanks and call for a specialized company. |
| Technical Detail : | |
| Appearance | Transparent liquid |
| Colour | Transparent |
| Odor | Acetate solvent |
| PH | N⁄A |
| Spec. gravity | (20°C): 0,960 gr. ⁄cc |
| Flashing point | 46°C |
| Packaging Detail : 250ml, 500ml, 1 litre, 5 liters and 20 liters containers. |