Sealers and CleanerGROUT SEAL
|
||||||||||||||||||||||||||
| DIRECTIONS : |
| Grout joints must be clean dry and free of existing sealers and coating to ensure good bonding. Apply 2 coats with a soft-bristle paint brush. Allow a minimum of 30 minutes drying times between coats. Sealed area should be kept dry for 12 hours. Achieves a full cure in 24 hours. Use cotton or paper towels, Polish dry any sealer remaining on the tile and grout within 3 to 5 minutes of application. Do not allow sealer to come in contact with any non-recommended surface. |
| COVERAGE : |
| Depend on size of groove |
| STORAGE : |
| Keep the bottles closed and in a cool place. |
| SHELF LIFE : |
| 12–24 months in original sealed packing kept in cool and dry place. |
| Technical Detail : | |
| Appearance | Liquid |
| Colour | Transparent |
| Odor | Slight, of petroleum |
| PH | 4–5 |
| Spec. gravity | (20°C): 1,01 gr. ⁄cc |
| Flashing point | 43°C |
| Composition | Organic resins dispersed in water. |
| Packaging Detail : 250ml,500ml,1 litre,5 liters containers. |