Sealers and CleanerEPOXY GROUT REMOVER
|
||||||||||||||||||||||||||||||
| DIRECTIONS : |
| 1. Always work in small area, i.e. less than 0.5m2. 2. Apply generously to the area required. Leave to work for approximately 4-5 minutes. 3. Once epoxy grout has softened, carefully remove with a suitable tool, i.e. a palette knife. 4. Repeat process if necessary to remove all deposits. 5. Wash down the area immediately afterwards with detergent and cold water. 6. Always dispose of any waste thoroughly. |
| COVERAGE : |
| N.A |
| STORAGE : |
| Keep the container closed and in a dry place. |
| SHELF LIFE : |
| 12 months in original sealed Tin packing kept in cool and dry place. |
| IMPORTANT NOTICE : |
| 1. Always ensure good ventilation, i.e. open windows and doors. 2. Turn off appliances, i.e. gas and electric fires, etc. 3. Protect surrounding areas from damage, i.e. paint work, plastics, textiles. 4. Wear suitable protective clothing. 5. Always store in a cool place to opening.. |
| FORTUITOUS LEAKAGE AND WASTE DISPOSAL METHOD: |
| In case material is released or spilled,clean up most of the product.Store the residue in plastic tanks neutralize with a solution of hydrochloric acid adjusting the pH to 6-7 then send to an appropriate water conditioner or call for a specialized company. |
| Technical Detail : | |
| Appearance | Liquid |
| Colour | Transparent |
| Odor | Slight of Petrolium |
| PH | 2–3 |
| Spec. gravity | (20°C): 0,900 gr. ⁄cc |
| Biodegradability | 90% |
| Flashing point | Not Flammable |
| Packaging Detail : 250ml,500ml,1 liter in Tin Packing. |