Sealers and CleanerCOLOURED STAIN REMOVER
|
||||||||||||||||||||||||||||||||
| DIRECTIONS : |
| Apply the pure product on the stain and let it stand from 15 minutes up to one night, depending on the nature of the stain and on the type of material. Rinse well with clean water and let it dry. If the stain is still visible, repeat the application. |
| COVERAGE : |
| N⁄A |
| NOTE : |
| The product, once the bottle has been opened, tends to loose its efficacy in the time. |
| WARNING : |
| Do not use in combination with other chemical products: possible formation of dangerous gas (chlorine) |
| IMPORTANT NOTICE : |
| We recommend always to test the product on an inconspicuous area, where it can not easily be seen before a general use. Keep the bottle closed and in a cool place. Storage stability: 6 months. Always make preliminary trials to test the stone resistance to the product. |
| FORTUITOUS LEAKAGE AND WASTE DISPOSAL METHOD: |
| In case material is released or spilled,clean up most of the product.Store the residue in plastic tanks then send to an appropriate water conditioner or call for a specialized company. |
| Technical Detail : | |
| Appearance | Transparent viscous liquid |
| Colour | Light yellow |
| Odor | Typical |
| PH | (5% solution):11÷12 |
| Spec. gravity | (20°C): 1,15÷1,20 gr. ⁄cc |
| Biodegradability | 90% |
| Flashing point | Not flammable |
| Composition | Anionic and non ionic surfactants in water solution |
| Packaging Detail : 250ml, 500ml, 1 litre,5 liters and 20 liters containers. |