PORO SEAL penetrates into the pores of the stone forming an invisible barrier. It protects the material against the penetration of dirt, water, oil, grease, coffee, tea, beverages. Generally ATS 60 does not affect the natural colour of the treated support. Only on some stones there could be a little change. It is 98% vapour permeable, UV light resistant and it will not turn yellow with time.
Spread a thin even layer of PORO SEAL by means of a soft brush, or lambs wool or low pressure sprayer. On the most absorbent stones two applications may be required. Wait 2–3 hours between each coat. Surface to be treated has to be completely dry and clean.
10-20 sq. mtr. / ltr.
The product does not make a film therefore products containing acid like cola, wine, orange juice will etch the surface of polished marble.
Keep the tin closed and in a cool place.
12–24 months in original sealed packing kept in cool and dry place.
For regular maintenance, clean the surface with NEUGEL or a neutral ph cleaner.
Flammable product. Provide adequate ventilation when used in confined spaces. Avoid sources of heat and flame. Protect eyes and skin from contact. Do not ingest.
Where to Use
PORO SEAL is used for treatment of porous floors, walls, kitchen tops, tables made of polished or honed limestone sandstone, travertine. Suitable to protect internal and external surfaces where a high degree of protection against staining is requested.
||(20°C): 0,94 gr. ⁄cc
500ml, 1 liter, 5 liters and 20 liters containers.