The advantage of two part epoxy grout system of DUPOXY is its high user friendliness that is i.e. the filling of this GEL filler in the grout is easier than all the distantly following equivalent products. It has a matt finish with an ingredient that provides crystalline sheen affect with ease of clean ability .

It is suited for residential and commercial installations including those with total hygiene control, damp and wet environments.

DUPOXY is easy to apply and easy to clean that lends the following advantages when used correctly:

Fields of Application

Suitable for resistant installation and grouting of floor and wall tiles and mosaic in interiors and exteriors with grout joints between 2 to 15 mm wide, such as :

Floor and wall tiles in general.

Floor and wall tiles in bathrooms and showers.

Under floor heating.

Kitchen counter tops.

Terraces and balconies.

Dubond's Dupoxy can be used for the grouting of ceramic tiles in environments submitted to direct contact with foods, like workbench of meats, dairy products of floor, basin for fish breeding, workbench in restaurant and bakeries.

Suitable for applications where surfaces are exposed to aggressive chemical substances such as dairies, laboratories, pubs, food factories in general. Also recommended for grouting swimming pools and tanks containing thermal or brackish water.

Suitable Substrates

Identification Data
Appearance	Part A :thick Colored Gel Part B: Soft Gel
Shelf Life	24 months in the original packaging in Dry Place
Application Data
Mixing ratio	Part A : 2 Parts by Weight Part A : 1 Parts by Weight The Two parts are pre-batched in their respective containers.
Specific Gravity of Mix	1.55 kg/l
Pot Life	About 45 minutes at T= +23° C
Permitted Application Temperatures	From + 12° C to +30° C
Recommended Application Temper	From +18° C to +23° C
Walk on Time	24 hours at T= 23° C
Ready for Use	5 Days at T=23° C
Joint Width	From 2 to 15 mm

Performance
Shear Adhesion Strength	Initial > 2 N/ m² (EN12003) After Immersion in water > 2 N/ m² After Thermal Shock > 2 N/ m²
Abrasion Resistance	= 250 mm³ (EN 12808-2)
Mechanical Flexural Strength After 28 Days in Standard Condition	= 30 N/ mm² (EN 12808-3)
Mechanical Compressive Strength After 28 Days in Standard Conditions	= 45 N/ mm² (EN 12808-3)
Shrinkage	= 1.5 mm/m (EN 12808-4)
Water Absorption After 4 hours	= 0.1 g (EN 12808-5)
Temperature of Use	From - 20° C to +100° C
Chemical Resistance	See Chemical Resistance Table in Technical Data Sheet

Packing Details

1 kg Container

5 kg Container