PINNACLE

Very High Performance

DUBOND S PINNACLE is a hi-tech single component adhesive with superior levels of adhesion and deformability. It is a high performance dry set adhesive for use with water or latex for installing ceramic tiles, marble ,stone, any kind of non porous or vitreous tiles or synthetic stone. Use with TUFFEX AD for high performance for interior and exterior Laying and Over Laying of sites. It has a special function that works specifically to counter conditions such as external pressures on cladding tiles of the skyscrapers and large format tiles with overlaying on existing floors. It is a secure professional method of laying for it has high deformability up to 10 mm thickness.

Application

Very good for large format paving slabs.
Fixing absorent floor and wall tiles outdoors and indoors. The tiles can be made of: cotto, twice- fired, single fired ceramic.
Fixing poorly absorbent or non-absorbent materials such as single-fired tiles, refine porcelain stoneware and vitrified tiles.
Suitable for fixing: on top of old ceramic tiles or on facades
Fixing natural stone and marble, so long as they are not affected by water
Spot-gluing insulating panels made of polystyrene, polyurethane foam, rock or glass wool.
Fixing on heating floors.

Suitable Surface

Cement Mortar Based Brick Mansory Old Ceramic Floors Cement Plaster Cement Terrajo Old Natural Stone

Technical Detail :
Colours	Grey & White
Mixing Ration	7.2 ltrs/ 1 bag 20 Kg Pinnacle
Coverage	Approximately 60 Sq. ft for 20 Kgs. Bag with 6mm X 6mm Square notch trowel for a bed thickness of 3 mm
Pot Life	≥ 4 hr
Self Life	12 month with original packing in dry storage place
Open time	≥ 30 minutes
Adjustability	≥ 45 minutes
Bed Thickness	5mm to 10mm
Grouting	≈ 8 hr on wall / ≈ 24 hr on floor

Final Characteristics
Shear adhesion after 28 days.	≥2.5 MPa	ANSIA-118.1
Tensile adhesion on concrete after 28 days.	≥2.5 MPa	EN 1384
Durability Test:
-Adhesion after heat agening.	≥2.5 MPa	ANSIA-118.1
-Adhesion after water immersion	≥1 MPa	EN 1384
-Adhesion after freeze thaw cycles	≥2.5 MPa	ANSIA-118.1
Working Temperature	from - 30°Cto80°C
Conformity	C2 TE	EN 12004

Packing Detail : 20 Kg. Bag